Easy weapons for a cheap n00b?

Siaarn · Post by **Siaarn** » Sun Feb 06, 2005 9:34 pm

I'm a newbie I guess at cosplaying, and I was wondering what is the easiest and cheapest thing to make weapon props out of? If anyone says wood they will feel my doomy wrath of pinkness

Sterling · Post by **Sterling** » Sun Feb 06, 2005 11:05 pm

depends on the weapon style. sometimes you can just get a "Samurai Ninja" sword for 500 tickets at Chucky Cheese. Or maybe for $20 get a blow up. That's if you go BASTARD DIRT CHEAP.

Try a halloween store and paint or mod it yourself.

Siaarn · Post by **Siaarn** » Sun Feb 06, 2005 11:35 pm

XD Bastard dirt cheap.. Anywho, thanks for the tip, I'll try some halloween stores.

Hemuloki-sama · Post by **Hemuloki-sama** » Mon Feb 07, 2005 5:24 am

Try some cardboard too! That's dirt cheap too!

Alchem · Post by **Alchem** » Mon Feb 07, 2005 6:12 am

If you can go cardboard, break the 12.00$ bank on some ghetto sheet foam and spraypaint. It may look awful, but come on, it's better than cardboard

.

Lmao btw my sig is true. email me if you want a pic of some of my early constructions with duct-tape and cardboard gundams.

Sterling · Post by **Sterling** » Mon Feb 07, 2005 6:45 am

if you use the foam, place a plastic coat over it like contact paper, $10 but it looks better than a dead man's face.

Fialchar · Post by **Fialchar** » Mon Feb 07, 2005 9:11 am

The dirt cheapiest (It's a word, I swear >_>; ) thing you can make weapons out of is exactly that... Dirt!

Ok, ok, how about having someone lay black fiberglass over a wooden base, I think it'd look pretty cool. Almost any high-end car audio installer can lay fiberglass, although they might look at you funny if you ask how much it'll be for a fiberglass sword (Make sure you indicate you want it painted)

You can lay fiberglass yourself, but if you haven't done it before.. I'd highly reccomend not laying it yourself, it's difficult and frustrating to say the least.

Sterling · Post by **Sterling** » Mon Feb 07, 2005 12:36 pm

How much does that cost?

Fialchar · Post by **Fialchar** » Mon Feb 07, 2005 2:48 pm

A huge variance according to where you go. For a car audio box (3 12" subs, for instance) could be 200-300 USD, unpainted. You could paint it youself because they'd usually charge like, an even grand for a painted glass'd box

I can see about getting a discount because I know almost all of the people that own or work in car audio/car performance shops in Pensacola.
(Steve's Car Tunes, Circuit City crew, Performance Mobile, and I know the owners of Notorious Motorsports, V&T Performance, and Technical Tricks)

Alchem · Post by **Alchem** » Tue Feb 08, 2005 10:59 am

Damn... you might as well resin cast for $100.00 and have it look better

Fialchar · Post by **Fialchar** » Tue Feb 08, 2005 2:24 pm

Well, it's $200 for a significatly larger item. Large enough to house 3 12 inch subs, or 3 15 inch subs, as well as having air space for them, room for the amplifies, power capaciters, etc. Something smaller like a sword/staff/etc shouldn't be nearly as much.

Sterling · Post by **Sterling** » Tue Feb 08, 2005 3:04 pm

I just made a wax Tetseiga... than it broke

I'm thinking maybe layerd plexiglass might work.

Alchem · Post by **Alchem** » Wed Feb 09, 2005 5:57 am

Fiberglass layering followed by an epoxy job works quite well. Use a sheet foam base or rigid insulation, you can get it at lumber yards or some hardware stores. The epoxy seals the fiberglass matting you would need to use and provides a firm base for painting. Spray the main sword (Post sanding epoxy!!) with a metallic coat and do a shinier paint on the sword edge for a neat effect. Slash it a little maybe for some realism if the character your cosplaying uses an active weapon.

Another option is ultra-cal 30 which is an extremely durable, hard and almost no shrinkage compound for molding. This method isn't cheap though, if you ahve any questions email it to me.

The first method with the fiberglass might run you say 50$ for a medium-large weapon ? Depends how much you shop around and the detail required. For High detail I suggest casting a foam base that has been wrapped in plastic and using a release. I try to carve hilts out of either wood or really strong foam and etch in the details with a thin knife and a pattern or in the case of wood with a wood burner and some post-varnish or paint.

Fialchar · Post by **Fialchar** » Wed Feb 09, 2005 8:31 am

Should be something like that. If you know how to lay your own fiberglass, it'd be much cheaper than a shop doing it. Most car audio installers hate doing fiberglass jobs because it's a pain to do, that's why they're able to mark it up so much.

Alchem · Post by **Alchem** » Thu Feb 10, 2005 2:16 pm

Fiberglass isn't bad if you wear gloves, work safely, work outside and buy good materials. It's not as scary as some people think.

Sterling · Post by **Sterling** » Thu Feb 10, 2005 8:28 pm

Alchem wrote:Fiberglass isn't bad if you wear gloves, work safely, work outside and buy good materials. It's not as scary as some people think.

I have scars from laying it down, I spilled honey on fresh fiberglass, and it bonded to my skin.

so I had to rip the flesh off and tape it till an ambulance could arive.

Siaarn · Post by **Siaarn** » Fri Feb 11, 2005 3:06 am

... I'm never using fiberglass after hearing that... XD

Alchem · Post by **Alchem** » Fri Feb 11, 2005 5:37 am

Don't let Sterling scare you ;p all you have to do is buy some good gloves and work carefully. Also, wear goggles... pull back your hair or wear a hat, wear a mask and COVER your hands. Can't stress that enough. If you protect your body it will turn out alright.

Hemuloki-sama · Post by **Hemuloki-sama** » Fri Feb 11, 2005 8:13 am

Yea, I've used fiberglass plenty of times. Just don't be an idiot like Sterling and have some common sense.

Fialchar · Post by **Fialchar** » Fri Feb 11, 2005 9:27 am

Seriously, using honey... Everyone knows you should spill glue and 2-ply epoxy on your skin before you stick your arm in fresh fiberglass : \

Dark_Tiger · Post by **Dark_Tiger** » Fri Feb 11, 2005 2:18 pm

For me, common sense requires buying a $40 fumes mask if you're going to be working with a lot of fiberglass or resin.

I also don't know where you guys are shopping for fiberglass supplies. 5 sq/ft cloth $4.95, resin $15 a pint at Wal-Mart. I'm still looking for a ABS source that won't eat me out of house and costume though.

Fialchar · Post by **Fialchar** » Fri Feb 11, 2005 4:28 pm

Dark_Tiger wrote:I'm still looking for a ABS source that won't eat me out of house and costume though.

Most cars have Anti-Lock Brakes from the factory.

(J/k, DT ^^)

Alchem · Post by **Alchem** » Sat Feb 12, 2005 4:56 pm

Fiberglass is dare i say.... fun? It's just so easy to do and when it dries its soooo easy to carve and paint.

Sterling · Post by **Sterling** » Sat Feb 12, 2005 6:17 pm

yup, I'm a dumbass.

Fialchar · Post by **Fialchar** » Sun Feb 13, 2005 10:57 am

Nah, you just made a mistake.

If nobody made mistakes.. well, we can't ALL be Asian : \

ACParadise Forums

Easy weapons for a cheap n00b?

Easy weapons for a cheap n00b?

bah :P