i need help making keyblade. Problem is I have no tools

[kingdomheartskrazy]

hi

[kingdomheartskrazy]

I was thinking of cuting the shape out then paper machae it till it takes its shape. Though I want it durable so I dont know if it will work

[kingdomheartskrazy]

.....

[kingdomheartskrazy]

IS ANYONE THERE?

[zaitenaiji]

I don't know other people made theirs, but I'm planning on making mine out of a PVC pipe and wood.

And try and be patient for answers here. This part of the forums doesn't move very fast and it takes a while for people to answer. Mine hasn't even gotten commented on yet.

[gravigurl]

wood and pvc is always good or even insulation foam core. it's cheap (about 8-11 bucks a 8foot sheet) and very durable you can cut and carve it to look right then paint it..just be sure to seal it before heading out it can chip.

[Valkyrie Aesir]

What you can do is take a pvc pipe, triple expanding foam, hot glue gun, a carpet cutter and paper mache.

1. Draw out the pattern on cardboard and cut it out.
2. Glue it to the PVC pipe with a hot glue gun.
3. Cover it in triple expanding foam (Such as Great Stuff from home depot) No matter what brand you buy it will take at least 3 hours to cure.
4. Carve it and sand it if you desire to get your shape using the cardboard cut out as a guide. (The Cardboard acts as support as well)
5. Cover it with painters tape
6. Cover it with paper mache
7. cover with paper mache clay and sand.

Now all you need to do is paint it. I've experimented with this before and it works wonders.

[mariasam]

I have made everything but the white top she is wearing but I'm not sure how to go about making it does anyone have any idea how i could do it?